Skip to main content

Arlo smart home integration, free and open source

Arlo integration for Gladys Assistant

Arlo cameras, doorbells and sirens: pictures, motion, battery, modes and scenes.

Brings your Arlo cameras, video doorbells, base stations and sirens into Gladys: pictures, motion, battery, Arlo modes (armed, disarmed, custom), siren, scenes and dashboard widgets.

Cloud integration. Arlo has no local API: everything goes through the Arlo cloud, with your Arlo account. Gladys needs an internet connection, and Arlo must be reachable.

What you get​

Arlo deviceIn Gladys
Camera (Pro, Ultra, Essential…)Image, camera on/off (Arlo privacy mode), motion, battery
Video doorbellSame as a camera, plus "Ring"
Audio doorbellRing, battery
Base station (hub)Arlo mode (list of the modes of the base), siren on Pro hubs
Wi-Fi camera without hubCamera features, plus its own Arlo mode and siren (Pro 3 and up)
Arlo sirenSiren on/off

Not supported (yet): live video streams, Arlo lights and chimes.

Setup​

  1. Tip: create a second Arlo account for Gladys and share your devices with it from the Arlo app (Settings → Grant access). Arlo allows only one web session per account: using your main account in Gladys can log you out of my.arlo.com, and the reverse.
  2. In Gladys, open the integration configuration and fill in:
    • Arlo email and Arlo password;
    • Verification code sent by: email or SMS (the method must be active on the Arlo account).
  3. Save, then click Send me a code. Arlo sends a code by email or SMS.
  4. Type the code in Validate the code (within 10 minutes).
  5. The status turns green. Open the Discovery tab and add your devices.

The login is kept in the integration (/data) and reused at every restart. When Arlo ends it (usually after a few weeks), the status asks for a new code: click Send me a code again.

Options​

OptionDefaultWhat it does
Refresh interval (s)60How often modes, batteries, pictures and recordings are read from Arlo. One minute minimum.
Fresh picture on demandoffWhen Gladys asks for an image, the camera takes a new one. Wakes battery cameras up: it uses their battery.
Detailed logsoffLogs every Arlo event. Useful to report a problem, turn it off afterwards.

The Test the connection button checks the login and reads the device list.

How it works​

  • Real time: motion, doorbell press, battery, privacy and siren changes arrive on the Arlo event stream.
  • Every refresh: the integration reads the device list (new picture of each camera), the active modes and the recordings of the last 24 hours.
  • Pictures: Gladys accepts camera images up to 150 KB. Larger Arlo pictures are made smaller by the integration.
  • Some Arlo accounts get no real-time stream. Then motion, mode changes and smart detections still arrive, but up to one refresh later.

Scenes​

Triggers​

KeyWhenFiltersVariables
motion_detectedA camera saw something move.Camera–
object_detectedArlo smart detection recognized what moved (needs an Arlo Secure plan). Arrives with the recording.Camera, what was seen (person, vehicle, animal, package)object
doorbell_pressedSomeone pressed a doorbell.Doorbell–
mode_changedA base changed mode from the Arlo app, a schedule or a geofence. Not fired when Gladys changed it.Base, new mode (armed, disarmed, custom)mode, mode_name

Use the variables in the next actions, for example {{triggerEvent.data.object}}.

Actions​

KeyWhat it doesResult
set_modeSwitches a base to a mode: armed, disarmed, or the name of a custom mode (e.g. Night).changed, mode_name
take_snapshotThe camera takes a new picture, shown in Gladys. Follow it with "Send camera image" to receive it.taken
sound_sirenSounds a siren for a duration (5 to 300 s) and a volume (1 to 8).started

The standard Gladys actions also work on the features: turn a camera on/off, set the "Arlo mode" select, stop the siren.

Dashboard widgets​

  • Arlo overview (arlo_overview): the mode of each base, the battery of each camera, the latest recordings with their thumbnail, and two buttons: Arm all / Disarm all.
  • Arlo camera (arlo_camera): pick a camera. Shows its latest picture, live battery and motion, its state and its last recording, with Take a snapshot and Turn on/off buttons.

Troubleshooting​

ProblemWhat to do
"Arlo needs a verification code"Click Send me a code, then Validate the code.
"No email verification method on this account"Choose the other method (SMS), or add it in the Arlo app (Settings → Two-step verification).
"Invalid credentials"Check the email and the password. Log in once at my.arlo.com to be sure.
Refused with HTTP 403Arlo's front door blocked the request. Wait a few minutes and retry; if it lasts, open an issue with the logs.
No battery valueWait for the next refresh: Arlo sends it on the event stream.
Detection does not fireSmart detection (person, vehicle…) needs an Arlo Secure plan; motion alone does not.

To report a problem, turn on Detailed logs, reproduce it, and attach the integration logs (Gladys → Integrations → Arlo → Logs) to a GitHub issue. The logs never contain your password or your token.

Privacy​

Your email, password and Arlo session stay in your Gladys. The integration only talks to Arlo servers (arlo.com domains). Arlo publishes no official API: this integration uses the same calls as the Arlo web application, and an Arlo change can break it until an update.

Configuration settings​

These are the settings Arlo asks for in its configuration screen in Gladys.

SettingTypeRequiredDescription
Getting startedsectionNoArlo works through the Arlo cloud: an internet connection and your Arlo account are needed. 1. Enter the email and password of your Arlo account and save. 2. Click "Send me a code": Arlo sends a verification code by email or SMS. 3. Type it in "Validate the code". Your devices then show up in the Discovery tab. Tip: create a second Arlo account, shared from your main one, for Gladys.
Arlo emailstringYesThe email you log in to the Arlo app with.
Arlo passwordsecretYes
Verification code sent byselectNoArlo asks for a code at each new login. The method must be set up on your Arlo account.
Refresh interval (s)numberNoHow often modes, batteries, pictures and recordings are read from Arlo (one minute minimum). Motion and doorbell arrive in real time.
Fresh picture on demandbooleanNoWhen Gladys asks for a camera image, have the camera take a new one instead of sending the latest Arlo picture. It wakes battery cameras up and uses their battery.
Detailed logsbooleanNoLog every Arlo event, to understand a problem. Turn it off afterwards.

How to install Arlo in Gladys​

  1. In Gladys, open Integrations: Arlo appears in the catalog, next to the native integrations, with a community badge.
  2. Click Install. Gladys pulls the Docker image (ghcr.io/prohand/gladys-arlo:1.0.1), starts it in a sandbox isolated from the core, and generates the integration's interface (devices, discovery and configuration).
  3. Open the Configuration screen of the integration, fill in the settings, and save.
  4. You can also install it directly from its repository URL: https://github.com/prohand/gladys-arlo.

Arlo requires Gladys >=5.3.0. The catalog inside Gladys refreshes every hour, so a new version becomes available at most one hour after its release.

Not running Gladys yet? It is free and open source: follow the installation guide to get started.

About external integrations​

Arlo is an external integration: a community integration packaged as a Docker container and published on GitHub, that Gladys installs in one click and runs in a sandbox isolated from its core. It is published and maintained by prohand, not by the Gladys core team.

Subscribe to the Gladys Assistant newsletter

A few emails per month about new releases and project news. Sent by Pierre-Gilles Leymarie, founder of the project. Unsubscribe anytime 🙂